Ideas for make bedroom storage bench cut the plywood into five parts, each 16 inches wide. Two pieces must be equal to the width of the joint. Two pieces must measure more than 16 inches by 14.5 inches and the final piece must measure 16 inches by the width to select. Then adjust the end piece of the side plywood for the time being. Shape the box with the other four pieces. The two 16 by 14.5 inch pieces should be interspersed between the two longer boards at the end.
Then for make bedroom storage bench, run a line of glue along the two side edges of each small piece of plywood, then press against the larger pieces to form the box. Fix the parts firmly by screwing in three cover screws at each corner. Space the screws about 5 inches apart, with the screws at the top and bottom 1 inch from the edge.
24 Photos Gallery of: Ideas of Bedroom Storage Bench
Run a line of glue on the four side edges of the remaining piece of plywood, on the side that will be inside the box. Place the remaining piece on top of the box, matching the edges. Secure in place by the cover fastening screws on all four sides, spaced 5 inches apart. Light the box on the right side up so that the wooden board is on the bottom.