Rubbermaid Outdoor Storage – If you are tired of moving garden tools or other objects out of the way every time you try to drive to the garage. Perhaps you should invest in a small storage shed, such as one made by Rubbermaid, to organize your things. After a few minutes, it can be assembled, placed in position and ready for storage. The assembly instructions are clear and easy to understand.
Contact your local municipal office to find out if you are required to obtain a permit for the size of your shed. Prepare the site by fixing. Either a concrete platform or a time treated wood foundation to set your storage ship on. Visit the Rubbermaid website to find the exact assembly instructions for your shed size. Check the parts of your shed with the assembly instructions parts list. To make sure that you recognize each piece and that nothing is missing.
24 Photos Gallery of: Rubbermaid Outdoor Storage Ship Instructions
Remove the screw holes and the tabs from the floor panels with your knife. And, also a screwdriver in the marked positions shown in the directions. Follow the exact instructions for removing the tabs from the side panels. And snap the left rear side panel into position on the floor. Place the roof panel in place, aligning the tabs on the slots. Install the four roof pins. Lift the door into position by setting the hinges on the hinge sockets. And raising the ceiling slightly to fit into place. Slide the locking bolt into position on the right door. And, also secure the door handle with screws to the left door.